If you are trying to find a way to fix a half-black screen on a Samsung TV, there are several helpful ways you can return your TV to its initial state. The half-black screen problem on Samsung TVs is annoying and, unfortunately, can cause problems. If the problem is with the backlight, it needs to be replaced. There are many different causes of a half-black screen. They include physical damage, software problems, cable connections, LED strip failure, display panel failure, and T-Con board failure. While this may not be the most ordinary crisis, it can occur for a variety of causes, including hardware problems, loose connections, software glitches, and external device compatibility issues. This can be very frustrating and difficult to know how to fix.
What is the cause of the black screen issue on my Samsung TV?
The most common cause of a black screen on a Samsung Smart TV is that there is no signal coming from the original appliance (e.g., line box or satellite receiver). If you are utilizing an HDMI cable to attach your Samsung Smart TV to a cable box or satellite receiver, make sure the cable television or satellite receiver is bound to the proper dock on the back of the TV. If you are utilizing an optical association, such as an RCA cable, make sure the RCA cable is attached to the proper harbor on the back of the TV.
10 Helpful Methods
1. Turn the TV Back On
If your Samsung TV has a dark shadow on one side, the first thing you need to do is turn it back on. If it is due to a software glitch, this will fix the problem. Otherwise, it does not apply to you.
Here is how to turn the TV back on
- Turn off the Samsung tizenOS TV
- Unclog it from the energy source and leave it unclogged for 60 seconds.
- When unplugged, press and hold the TV’s power button for approximately 60 seconds to fully discharge the TV’s circuit power.
- Turn the TV back on and check to see if the image on the screen is evenly bright.
2. Tap the TV Bezel
The old-fashioned method of tapping to fix the problem still works. I fixed a Samsung TV with a half-black screen by simply tapping around the problematic rear/side bezel half of the screen. Many users also reported that doing the same thing fixed the problem. So, tap on the black bezel or side bezel on the side where the black screen effect is occurring whether it is the top half, bottom half, right side, or left side of the screen, and tap on it. If this works (even if you have your doubts), leave a comment below.
3. Replace the HDMI Cable Socket
If the cable is not established correctly, it is likely to generate signal noise and appear as a half-black screen.
This can be one of the following
- The HDMI cable has a broken wire and is malfunctioning
- A harmed HDMI port with shattered brads
- Poor HDMI association, where the thread and connector are not producing complete reference
To check HDMI and other cables:
- Turn off the TV.
- Disconnect any HDMI or other physical cables connected to the back of the TV.
- If compressed air is available, use it to clean the contacts on both the cables and the TV connectors. If compressed air is not open, blow on it lightly.
- Push the cable firmly into the slot on the TV.
- Turn the TV switch on again.
4. Troubleshooting External Devices
Addressing external device-related issues may resolve this problem. This is because malfunctioning or improperly connected devices can interfere with the TV’s display performance.
To do this, you should temporarily disconnect any exterior devices, such as game consoles, streaming appliances, or cable boxes, and see if the TV screen returns to normal.
If you suspect a bad connection, follow these steps
Step 1:
Disconnect the external device
Step 2:
Turn off the TV
Step 3:
Unplug the TV and wait a few minutes
Step 4:
Drill the TV back in and depend it on
Step 5:
Check internal content
Switch to internal content, such as the TV’s built-in apps or regular TV channels.
See if the problem of the screen going half-black persists.
Step 6:
Reconnect external devices one at a time
Reconnect each external device individually and see if any of them are causing the half-black screen issue.
5. Run An Image Test
Samsung TV allows you to run an image test to determine the cause of the half-black screen.
You can also find the best image mode for your Samsung TV. But let’s focus on the problem you are having. This section describes how to run an image test on a Samsung TV. This method should work on new and old models of Samsung TVs.
How to run the picture test on a SAMSUNG TV
- Go to “Settings
- Scroll down to “Device Care
- Navigate to the Self-Test Picture Test and press OK.
- Select “Yes” if the image appears normal or “No” if there is a problem.
6. Still Picture Settings
As an alternative troubleshooting method, you can reset the picture settings on your TV.
Get your TV remote and navigate to Settings >Picture Settings > Expert Settings. Scroll down and select Reset Picture Settings. The TV will be reset to the default picture settings, allowing you to remove the half-black screen.
7. Reset the Entire TV to Default Settings
To resolve this issue, reset the Samsung TV to its default settings. This procedure will overwrite all settings and return the TV to defaults. However, the disadvantage is that doing this will also delete your personal information and any apps you have added. Therefore, before proceeding with this procedure, make sure that you do not have any essential data stored on your TV.
To reset Samsung TV to factory settings, follow these steps
- Go to Settings > General. 2.
- Scroll down to Reset
- The TV may ask for a PIN. If you still need to do so, enter 0000, which is the default PIN for Samsung TVs, and then enter it. The TV will reset and reboot.
8: Replace the LED Backlight
- If all of the above solutions do not work, the LED backlight has failed.
- If you are not a TV technician, do not attempt to replace it yourself.
- Take the TV to a professional technician for proper diagnosis and repair.
9. Resetting Samsung TV to Factory Settings
Resetting the TV to factory backgrounds is a more robust procedure, as it will remove all personal settings features, downloaded apps, and connected devices. Still, it is worth a try if other methods have yet to work.
- Enter your PIN, to reset the Samsung Smart TV to factory settings: 1.
- Press the Menu button or the Home button on the remote control and go to Settings.
- Then General and Privacy.
- Then Reset.
- Samsung is 0000 (four zeros) by default.
- Then select one last reset in the pop-up. 10.
10. Update Samsung TV Firmware
The resolve the issue of half of the Samsung TV screen going dark, you should start by updating the Samsung TV firmware. Outdated software is often when the root of all software problems with Samsung TVs.Software updates usually include fixes for such problems.
To update your Samsung TV firmware, follow these steps:
1. Head to Settings > Reinforcement > Software Update
- Select “Update”. 3.
- reboot the TV when the update is complete.
Final thoughts
The problem of the Samsung TV screen going half black is annoying, but if the problem is with the backlight, unfortunately, it may need to be replaced. Start by examining the TV’s backlight with a flashlight in a dark room. Make sure the wall outlet is functioning correctly, and unplug and unplug all HDMI cables connected to the TV once to make sure they are working correctly. Turn the TV back on and check for any pending updates. If the TV screen is still half black, there may be a problem with the TV’s internal components, and you should consult a professional to resolve the issue.
Read more:
Tesla screen black: reasons and solutions
How To Fix The “A D3D11-Compatible GPU Is Required To Run The Engine” Error In Windows
To Use OnlyFinder in 2023?
How to tell if you are blocked on your iPhone without calling?
What is the reverse AI art filter TikTok trend?
How To Turn Off iPhone XR?
