Many players connect the PS4 console to the PS4 controller via USB or cable. Even if you don’t have a USB cable, you can link your PS4 to your console with Bluetooth. You can perform this from the Settings menu on the PS4 dashboard. The remote control is required to operate the menu if the controller is not connected to the PS4. You may need to connect DUAL Sensor4 without USB; for example, if the USB cable is missing, the cable is faulty, or there is a problem with the controller connection port. There is an effortless way to connect the PS4 body without a USB or cable. Here, we’ll provide instructions on connecting a PS4 controller to a PS4 without using a USB cable.
How to connect a PS4 controller without USB?
The PlayStation 4 features a wireless controller that can be synchronized via Bluetooth or a USB mini cable. It has a 1000mAh battery and can play for 4-8 hours. Battery life depends on whether you use rumble or haptic feedback.
You must have a PlayStation remote to connect a PS4 controller without a USB cable. You can also utilize a controller if you already have one connected.
Step 1:Bluetooth Find a device.
Use another controller or remote control to open Settings on the PS4 dashboard. Go to Devices and go to Bluetooth Devices. The game machine automatically searches for a connected Bluetooth device when you open this menu. Attaching to other devices is also possible, but the controller must be powered on and connected to the console.
Step 2: Sync Your Controller
Click and hold the PlayStation and Share button keys to connect to the gamepad. Within 5 to 10 seconds, the controller appears in the list of available Bluetooth devices.
Step 3: Connect Your Controller
Select the controller on the Bluetooth device screen. The controller should establish a connection with the machine. Be aware that other Bluetooth-enabled devices may interfere with the controller’s connection. If the controller loses connectivity with the PS4, you can reconnect by repeating this process.
Link the PS4 controller to the PS5 console.
The procedure is the same for PS5. With the PS5, you can play old-generation games using Dual Shock 4. So, of course, you can connect.
For example, suppose you already have a Dual Sense 5 peripheral that is in sync with your console. You can use it to browse the UI and pair older controllers:
- Use the main controller to navigate to the settings ps5.
- Now click on Accessories.
- Pick “Bluetooth Accessories” on the right side of the display. ps5 Bluetooth access
- Locate DualShock 4 (the controller you want to pair with). Next, push and retain the Share and PS buttons simultaneously for 5 seconds. PS Share Button
You should now see DualShock 4 in the menu. In the “Found Accessories” area, select it.
How to Connect a PS4 Controller in Remote Play?
While taking advantage of the dual shock, the 4 Bluetooth feature is one of the easiest ways to connect your controller to the console; you can also connect your controller with PlayStation’s remote play software.
You can enable Remote Play by doing the following:
Step 1: Download Remote Play
Download and install the official PlayStation Remote Play software on your computer. The software is developed to allow you to play games remotely, but it can also be used to sync your controller to the console.
Step 2: Sign in to the Software
Once you have lodged the software, sign in with the username and password you employ on your PS4. It will synchronize your PS4 account with your Remote Play software.
Step 3: Sync your controller to your computer
While the software is running, connect the dual shock 4 to your computer using the Bluetooth feature or a micro USB cable.
Step 5: Connect the PS4 Controller
Open Settings on the PS4 dashboard and select Accessory Settings. You will see an option to synchronize your connected controller with the PS4.
Step 6: Remove the Controller from the Computer
Once your controller is synced to PS4, you can remove the controller from your computer and play it. The controller should be connected until the PS4 is powered off or in rest mode.
Connecting a PS4 Controller to an Android Terminal
Thanks to the Bluetooth feature, the PS4 controller can now also be used on Android tablets, mobile phones, and smart TVs.
- The connection to the Android terminal is seamless and intuitive. The controller can operate the device as a remote control or play games on the Android platform.
- Android has a limited number of game titles, but recently controller support has increased in Android. The main reason why many popular games are natively compatible with PS4 controllers is that Google has entered remote play via Google Stadia.
- The Stadia platform may provide controller support for more games.
- To connect a dual-shock 4 controller to an Android terminal:
Step 1: Prepare the Controller
On the PS4 controller, press and hold the PS and Share buttons for 5 seconds. At this point, the controller’s backlight should begin to blink.
Step 2: Android Turn on the Bluetooth of the terminal.
- Go to Settings and tap Bluetooth.
- Tap the slider to turn it on.
Step 3: Connect Your Controller
- Click Scan on your Android appliance. You can see below the list of appliances and pick the Wireless Controller.
- You can now operate the controller for gaming or as a remote.
- When connecting to an Android device, it is necessary to turn off the game machine that was connected previously.
How to Reset a PS4 Controller?
If the PS4 controller still cannot be connected, try to settle the issue by resetting the PS4 controller.
- Turn off the PS4 properly.
- Disconnect the Internet by unplugging the Ethernet cable or wireless router.
- Turn the controller over and peek for the reset button from the little hole next to the pin next to the L2 button.
- Carefully insert a thin pin, paper clip, or anything you can poke into the slot.
- Press the reset button in the hole for a few seconds (about 5 seconds) and then release.
- Connect the DS4 controller to the PS4 with a USB cord.
- Switch on the PS4 and press the PS4 button in the controller’s center to resynchronize until the beep is heard.
PS4 Controller Cannot Connect
If you follow the above steps up to the latter, the PS4 may not recognize the connection. In such cases, we recommend troubleshooting ideas. Here are some recommended practices to do so.
If the PS4 controller is wired, make sure the controller is properly linked to the PC and PS4. The controller will only be recognized if the connection is tight and properly connected.
For PS4 controller wireless connectivity, ensure the PS4 controller is connected to the PS4 properly. Also, make sure that the wireless connection you selected is working properly. If there is a concern with the wireless linkage, the PS4 controller may be unable to connect to the PC. The same involves if you do not connect the controller to PS4.
If the troubleshooting steps above don’t help, try restarting your PC and PS4 console. It should solve any problems that occur when connecting.
Disadvantages of connecting a PS4 controller without USB
When connecting a PS4 controller without USB, remember that the controller may have input lag because it is wireless.
Sony’s dual shock 4 controllers are designed to withstand even the most intense gaming sessions. However, certain problems can develop. Since no perfect device exists, even a PS4 controller can experience input lag.
But the promising information is that it rarely happens. If you sense there is an issue with the controller, you should connect it to USB immediately.
video credit: Olusola Godwin Ogbogho
Frequently Asked Questions
How do I manually connect the PS4 without a controller?
There are several ways to manually connect the PS4 without using a controller. You can employ the keyboard on the screen, the USB gamepad, or the built-in voice recognition function of PS4.
What should I perform if my PS4 controller fails to connect?
If the PS4 controller is not connected, you can try several methods. First, make sure the controller is charged correctly. Next, check the controller contacts for dust and dirt. Finally, connect the controller to another device to see if it works.
Why is the PS4 controller blinking blue and unable to connect?
If the PS4 controller cannot connect or is experiencing blue-blinking issues, there are several possible causes. Here are some of the most ordinary:
- The controller may be defective and requires replacement.
- There may be trouble with the cable that needs to be replaced.
- There may be a problem connecting Bluetooth.
- THE PS4 IR port may need cleaning or replacement.
Why is my PS4 controller blinking white and unable to connect?
If your PlayStation 4 controller is blinking white, several possible causes exist. The most common case is when the controller needs to be charged. To charge, connect the controller to the PS4 and wait for the lamp to turn green. Check the troubleshooting guide for more information if a broken wire or connector causes the blinking light.
Why does the PS4 controller keep blinking blue?
The PS4 controller may exhibit a blinking blue light for various reasons. One potential cause could be an issue with the controller’s battery; if it’s not charged, recharging the controller is necessary. Alternatively, the blinking blue light may indicate a problem with the controller’s Bluetooth connection. If the Bluetooth connection is unstable, the controller may display a blinking blue light.
Final Thoughts:
In this article, we have got the all pieces of information that add value for you especially “How to connect PS4 controller to PS4 without USB?“. As a gamer, you have always to face problems, and these game consoles are pretty loveable. Everyone likes to make them more usable and perfect. Here if you find any other problem, how to clean your console for long-term use, click here.
